TECHNICAL DESCRIPTION
This Sigma Mixer machine widely used for:, plastic, rubber, silicon, soap,paint, printing ink, basoid, carbon, food stuff, medicine etc, Mixing room and agitating rotor are all made by stainless steel, The jacket of mixing room can be designed into electric heating, steam heating, steam heating or water cooling. Discharge ways include hydraulic tilt,, screw extruder and bottom valve discharge etc.
Z BLADE MIXERS
All Z Blade Mixer are equipped with two mixing blades placed in a W-shaped horizontal trough. Various blade profiles have evolved, each of which is best suited for a particular type of application. The commonly used blade types are the sigma blade, masticator blade, shredder blade, naben (aka fishtail) blade, and spiral blade. The rotation of the blades is either tangential to each other or the blades may overlap within the trough. The blades rotate toward each other at the same or differential speeds. The blades pass the container walls and each other at close clearances (2-3 mm) resulting in homogeneous mixing. The close clearances produce very high shearing action thereby reducing any large particles. These mixers produce a consistent particle size distribution without the need for additional high speed choppers. Homogeneous mixing is achieved within 10 to 30 minutes. Mixing homogeneity upto 99% and better can be achieved using the double arm kneader mixers. These sigma mixers and their variants (double arm kneader mixer extruders) are capable of handling material with viscosity as high as 10 million centipoises. The power consumption in double arm kneader mixer is very high compared to other types of mixers and can range from 45 to 75 kW/m3 of mix material. The sigma blade mixer is the most commonly used type of double arm kneader mixer, and is best suited for all round use.
Double Arm Sigma Mixer is widely uses for mixing glass putty, plasticizer solution, biscuit dough, sauce, polymers etc.
Salient Features
- Available in Stainless Steel 316, Stainless Steel 304 and Mild Steel materials.
- Stainless Steel polish to matt & mirror finish as per customer’s requirements.
- Mild Steel finish with one coat of red oxide and two coats of epoxy paint.
- Discharge option of hand wheel operated (manual) or hydraulic operated (automatic) offered.
- Jacket for heating or cooling application can be offered.
- Mineral wool insulation with cladding on jacket.
- Tangential designed ‘Z’ blades offered for uniform mixing.
- PTFE made shaft sealing provided for food grade compatibility.
- Minimum gap between trough inner shell & blades remove possibility of sticking product.
- On demand Spray system, vacuum system
Optional Features/Accessories
- Liquid Spray System
- Vacuum System
- Blades Cooling Arrangement
- Screw System
- Automatic Valve Discharge System
Technical Specification
Model | Capacity – Litres | Motor (H.P.) | ||
Working Capacity | Gross Capacity | General | Heavy Duty | |
ASM – 50 | 50 | 80 | 5 H.P. | 7.5 H.P. |
ASM – 75 | 75 | 110 | 7.5 H.P. | 10 H.P. |
ASM – 100 | 100 | 150 | 10 H.P. | 15 H.P. |
ASM – 150 | 150 | 200 | 15 H.P. | 20 H.P. |
ASM – 200 | 200 | 300 | 20 H.P. | 25 H.P. |
ASM – 400 | 400 | 550 | 30 H.P. | 40 H.P. |
ASM – 500 | 500 | 750 | 40 H.P. | 50 H.P. |
ASM – 750 | 750 | 1150 | 50 H.P. | 60 H.P. |
ASM – 1000 | 1000 | 1500 | 60 H.P. | 70 H.P. |
ASM – 1500 | 1500 | 2100 | 75 H.P. | 80 H.P. |
ASM – 2000 | 2000 | 2600 | 80 H.P. | 90 H.P. |
ASM – 3000 | 3000 | 3800 | 100 H.P. | 120 H.P. |
* Power voltage can be adjusted as per customer’s domestic power voltage requirements. * Rights of technical improvements & modification reserved. * Illustrations & dimensions are shown for information purpose only.